img-download-app
img-download-app

A 4 way valve (reversing valve) must have a ___-___ psi pressure differential to operate properly.

Visit our website for other HVAC topics now!
Related questions
Liquid and vapour move at different velocities because gravity has a greater influence on the liquid. What is another name for this?
Name the 5 bulb charge designations, their corresponding application use, and super heat settings.
When is a distributor not needed?
What are the minimum and maximum lengths of tubing for a cap tube? What happens if they are ignored?
What are 3 symptoms and 3 corrections for floodback?
What are the two major applications of the low-pressure switch?
How are C.P.R's designated?
Which metering devices have a critical charge?
Are C.P.R's position sensitive?
Explain CSIR motors.
When is a distributor needed?
How should a receiver be sized?
Which metering devices equalize in the off cycle?
Split phase motors (AKA _____?) are used on what kind of motors?
Explain LRA. What kind of safety is used to protect the motor circuit during LRA?
Where and how must a liquid line filter drier be installed?
What will a filter drier filter?
At what temperature will oil begin to break down?
What motor types are PSC motors used on?
Are solenoid valves direction sensitive?
Where is the oil separator located?
Why do high side float systems need a critical charge.
What must be a consideration when using a TXV on a pressure dropping evaporator and why?
What is the greatest contributor to high compression ratios?
Where should the TXV bulb be installed?
A high pressure switch _____ on a ______ in pressure.
Is a receiver needed for a cap tube?
What is the primary purpose of a crankcase pressure regulator?
What does the distributor do?